BATTERY MOUNT – HILUX (GEN 8 / N80) SUIT BAINTECH BATTERYS

Baintech Version

This version has been designed to mount the following batteries from Baintech 

Baintech ultra-slim lithium batteries:

• BTLITH-1275-SL
• BTLITH -1275-SL-DCS
• BTLITH -12110-SL
• BTLITH -12110-SL-DCS
• BTLP12V110-100SL

Vehicle Compatibility

Suitable for Toyota Hilux 2015+ (Gen8 AN120, AN130)

Installation Notes

Installed on the driver-side of the cab back wall.

The back plate includes pre-cut holes for two twin-midi fuse holders or two single-midi fuse holders (fuse holders not included).

No-drill installation, using original thread inserts and holes in the vehicle cab wall. No cutting of metalwork is necessary.

One hole in the cab wall cross-member needs to be tapped to convert it from a 5mm hole to an M6 bolt hole. An M6 thread tap can be purchased from hardware stores or online with fast delivery from Amazon by clicking here.

The contoured carpet panel on the back wall must be removed for installation. Once the battery is mounted you may decide to cut the panel and re-fit the remaining parts, but there will be little remaining on the driver side.

Installation of the battery mounting bracket takes around 30 minutes.

New bolts included.

Material

Stainless steel.