1 10

THUMPER

THUMPER REDARC DC-DC CLASSIC BATTERY BOX + THUMPER 120AH AGM + 8MM CIRCUIT BREAKER LOOM KIT

THUMPER REDARC DC-DC CLASSIC BATTERY BOX + THUMPER 120AH AGM + 8MM CIRCUIT BREAKER LOOM KIT

BBRCLASSIC+AGM120+LCB

$1,109.00
$1,109.00
Sale Sold out
Tax included. Shipping calculated at checkout.
This model battery box has been designed to suit all battery chemistries.
Altering the charging profile from AGM / GEL to LITHIUM is now as simple as changing one spade connection inside the lid of this battery box and that's it!

Key Features:
Built with the Redarc BCDC25D DC charger
Designed to suit new model vehicles with smart / variable alternators
Also compatible with older model vehicles
Will increase low voltage output from vehicle output to allow battery to reach 100%
Will act to isolate from the vehicle's main battery once ignition has been switched off
Designed with an independent Anderson connector for vehicle input
Designed with an independent Anderson connector for solar panel input (regulated connection - up to 400-450watts of solar)
Internally wired and protected with circuit breaker protection, allowing for an easy connection direct to the battery
Equipped with multiple outlet sockets for running 12 Volt appliances
Available in multiple packages with and without wiring looms / mounting trays and battery.


This particular model suits a DUAL CHEMISTRY of both Lithium & AGM:

Comprising of:
1

Redarc BCDC1225D 25Amp DC Battery charger (solar and vehicle compatible charge)

- suitable for Lithium / Gel / AGM / Calcium  
2 Marine grade Cigarette socket - rated to 16 Amps
Includes rubber cap design to protect all sockets
1

Engel Fridge type socket (2 prong design) - rated to 16 Amps
1 Dual USB socket - rated to 2.2Amp (min rating)
- used to illuminate the Volt meter gauge and activate the USB
2 50 Amp Anderson connectors - Labelled INPUT/OUTPUT
(one fitted to front of box and one on rear) 
1 50 Amp Anderson connectors - designed purely for solar panel input - labelled "Unregulated solar input"
1 50 Amp Anderson connectors - designed purely for vehicle (alternator) input - labelled "Alternator input"
1 All internal cabling to allow you to simply connect straight to the battery terminals
1 3 year manufacturing warranty

Internal Dimensions:
Length
 330 mm
Width 183 mm
Height 220 mm (base only - lid allows for further height)

External Dimensions:
Length
 410 mm
Width 260 mm
Height 280 mm
* Dimensions includes all protruding outlet sockets *

LOOM KIT

This cable is designed to allow you to fit your own Anderson connector from your battery.

  1. Simply mount the Anderson connector (for example on the rear of the vehicle / or on the front of the Caravan A-frame).
  2. Feed the cable length back to the battery location
  3. Connect your negative (black wire) directly to the negative of the battery
  4. Fit the Circuit breaker (provided) in line of the positive (red cable), as close the battery location as possible.

The circuit breaker will act to protect the line (similar to a fuse). If there is a fault on the line, the circuit breaker will 'trip' until the fault has been remedied. It will 'automatically reset' itself once the fault is no longer present.

 

Specifications:

  • Cable = 6 meters of 8mm twin core automotive cable - rated to approx. 75 Amps over 6mt
  • Anderson = 50 Amp Genuine Anderson connector (Uni-sex)
  • Circuit breaker = 50 Amp automatic reset circuit breaker


MADE IN SOUTH AUSTRALIA BY BLUE APPLE THUMPER

View full details