TOYOTA LANDCRUISER PRADO 150 SERIES 2016 ONWARDS REDARC DUAL BATTERY SYSTEM

Category:

Delkor Marine & Leisure M27

Travel across the oceans with Delkor Marine & Leisure batteries. Developed with cutting-edge technology, they power up your fun adventures, offering steadfast power over long journeys and in all kinds of weather.

Perfect for marine craft and recreational vehicles. Perfect for the well-deserved leisure time you’ve been waiting for.

Key Benefits

  • Convenient maintenance-free battery, no topping up of fluid required
  • Reliable electrical performance with wrought grid plates
  • Added strength and vibration resistance with anchor bonding
  • Increased durability with high-strength polypropylene case
  • Enhanced safety with heat-sealed covers and built-in spark arrestor
  • Ideal for dual-power applications

Delkor Marine & Leisure M27 Specs

Model: M27
CCA: 680 A
AH(20HR): 97 Ah
RC: 162 Min
Post Type: MARINE
Polarity: R ( +, – )
Length: 305 mm
Width: 172 mm
Height: 225 mm

Dimenions

REDARC BCDC1225D

Length (mm) 150
Warranty 2 Years
Width (mm) 120
Height (mm) 37
Weight (kg) 0.68

 

Features

  • Separate DC and solar charging inputs
  • Maximises the performance and life of your auxiliary battery
  • Simultaneous DC and solar charging with Green Power Priority
  • Suits 12V/24V standard and variable voltage/smart alternators
  • Suitable for AGM, GEL, standard lead acid, calcium and LiFePObatteries

The REDARC BCDC1225D In-vehicle Battery Charger is the next generation in REDARC’s DC to DC charging technology, with additional features that make it the most advanced dual battery charger on the market.

Featuring a Maximum Power Point Tracking (MPPT) solar regulator, the BCDC1225D will charge from both solar and the alternator simultaneously. And, with built-in ‘Green Power Priority’ it will select solar charging first, meaning less load on the alternator.

Suitable for 12 or 24-volt vehicle systems, the unit will also work with either standard or variable/smart alternators.

The BCDC1225D features the same patented charging profiles as it’s predecessor along with a new lithium charging profile making the unit suitable for charging AGM, Gel, Standard Lead Acid, Calcium and LiFePObatteries.

For most applications, the BCDC1225D is suitable for battery bank sizes of 75-200AH. For higher capacity needs of over 200AH, REDARC recommends the BCDC1240D.

Proven and Tested

The award-winning technology in the BCDC has been independently verified and tested to ensure battery life is maximised, charging your battery to a proven 100%.

Built in Australia and tested for our unique conditions, the DC to DC battery charger will work in the extreme heat of the Simpson Desert, up to 80°C and can handle deep water crossings at Cape York – water, dust and vibration are no match for this charger.

If you’re heading out into the bush and want to get there and back again safely – you can trust REDARC.

The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.

Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.

The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.
The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor.

The SmartShunt is available in 500A. The 1000A and 2000A will follow later this year.

PROJECTA BATTERY TRAY

PART NO HDBT118

Suits: Prado 150 Series 08, 2.8 Litre Turbo Diesel
(Not suitable for Kakadu Version)
Models: Auto/Manual
Years: Sep 2016 Onwards
Location: Engine Bay
Max Battery Size (mm): L300 x W174 x H220
Max Battery Weight: 23Kg
Suits Battery: N70

The REDARC BCDCMB-003 Mounting Bracket

The REDARC BCDCMB-003 Mounting Bracket is suitable for Toyota Prado 150 Landcruiser, enabling installation of our BCDC range into a vehicle’s engine bay.

The REDARC BCDCMB-003 is a vehicle-specific Mounting Bracket for REDARC’s BCDC DC-DC battery charger range, it is designed for installation into the engine bay of Toyota LandCruiser Prado 150 that were built from October 2009 onwards.

This sturdy bracket is designed from 304 stainless steel and provides installation of the BCDC In-vehicle charger into the existing mounting points found in the Prado’s engine bay.

By installing the BCDC DC charger into the engine bay you are ensuring optimal performance as the battery charger can receive cool airflow as you travel along.

This kit includes everything you need to install the charger including a mounting bracket, fasteners and instructions.

With more and more electrical devices being used when travelling around Australia, along with more complex vehicle electrical systems, having the right battery charging solution has never been more important. The REDARC range of In-vehicle Dual Battery Chargers ensure optimum performance of electrical equipment

By employing a unique, multi-stage charging algorithm, the In-vehicle Dual Battery Chargers have been designed to charge any commonly used automotive auxiliary battery to 100%

IN THIS PACKAGE

DELKOR M27 DEEP CYCLE BATTERY

REDARC BCDC1225D DC-DC/MPPT CHARGER

REDARC BCDC MOUNTING BRACKET

PROJECTA

2 X MIDI INLINE FUSE HOLDER AND FUSE

ACCESSORY BOX – VOLT / 2 X CIG

INLINE BLADE FUSE

6MTR 6MM TWIN CABLE

3.5MTR 8MM TWIN CABLE

 

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.