Toyota Hilux Ausmotion Bracket with Custom Lithium 100Amp Ultra Slim – Complete System

Custom Lithium 100Amp Ultra Slim

180AMP BMS
Continuous 180AMP
Discharge Overcurrent Protection 750AMP
Max Charge Current 100AMPs
Standard Red/Black Terminals

Enclosure is made of a 3mm ABS Plastic.

100 AH Ultra Slim Lithium Battery suited for most 12v requirements.
Includes:  180AMP Battery Management System (BMS)
5 Year Warranty

Battery Mount – Hiliux (Gen 8 / N80) – Behind seat Lithium Battery Mount

Battery Compatibility

Please select your battery from the drop-down lists above when ordering.

Custom Lithium Version

This version has been designed to fit the Custom Lithium 100Ah Ultra-Slim battery with either plastic or metal case.

Thanks to the Custom Lithium battery being more compact than some other brands, the Redarc DCDC charger is mounted on the back plate alongside the battery rather than on the end of the plate.

Vehicle Compatibility

Suitable for Toyota Hilux 2015+ (Gen8 AN120, AN130)

Installation Notes

Installed on the driver-side of the cab back wall.

The back plate includes pre-cut holes for two twin-midi fuse holders or two single-midi fuse holders (fuse holders not included).
No-drill installation, using original thread inserts and holes in the vehicle cab wall. No cutting of metalwork is necessary.

One hole in the cab wall cross-member needs to be tapped to convert it from a 5mm hole to an M6 bolt hole.

The contoured carpet panel on the back wall must be removed for installation. Once the battery is mounted you may decide to cut the panel and re-fit the remaining parts, but there will be little remaining on the driver side.

Installation of the battery mounting bracket takes around 30 minutes.
New bolts included.

Victron Energy Smart Shunt

The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.

Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.

The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.
The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor.

The SmartShunt is available in 500A. The 1000A and 2000A will follow later this year.