Sale!

THUMPER BATTERY BOX WITH PROJECTA IDC LITHIUM DC-DC/MPPT CHARGER

$849.00 $629.00

Save: 25.9%

or 4 fortnightly payments of $157.25 with Afterpay More info

Thumper Battery Box Dimensions

External Dimensions of Battery Box 
Length – 410mm
Width – 260mm
Height – 315mm
* Dimensions includes all protruding outlet sockets *

This unique battery box design is packed with numerous features.  The major feature is the Projecta IDC25 Lithium DC-DC/MPPT charger mounted on top of the box lid.  The charger has been wired into the electrical system with Anderson plug inputs for both the Alternator and Solar charge connection.  The Projecta IDC25 Lithium charger has dual charging modes designed to charge from a smart alternator or conventional alternator.
The Thumper battery box design is simple to use and has the added feature of simultaneous dual battery charging from both solar and alternator inputs (9–32V) with no manual switching required.  This means that a flat solar panel can be mounted on the roof of a vehicle or van and be permantly plugged into the solar input on the Thumper Battery Box.

The Thumper Battery Box with the Projecta IDC25 Lithium setup is really portable due to the light weight nature of a Lithium battery.  This means the Thumper Battery Box is the perfect companion for your campsite and in-vehicle dual battery system.
The Thumper battery box with Projecta IDC25 Lithium will fit a NZZ70 size battery which is normally a 100ah LifePO4 lithium battery.

Projecta IDC25 Lithium DC-DC / MPPT Charger

FEATURES

Lithium charging technology
Engineered for use with todays advanced lithium battery technology

Engine bay installation
Sealed to IP67, the IDC is dust, splash and shock proof and can safely operate in extreme temperatures up to 80°C

Dual charging modes
Engineered to work with both smart and conventional alternators

Dual input operation
Simultaneous dual battery charging from both solar and alternator inputs

Total safeguard protection
Over temperature, reverse connection, over/under and spark free protection

Dual input operation

Simultaneous dual battery charging from both solar and alternator inputs (9–32V) with no manual switching required. The unit prioritises solar charging as its default and automatically adjusts to the alternator if sunlight is insufficient, reducing the power usage placed on the vehicle’s electrical system.

Dual charging modes

Engineered to work with both smart and conventional alternators. The introduction
of smart alternators has resulted in many conventional dual battery systems being ineffective. The advanced switch-mode technology of the IDC range enables greater efficiency, exceeding 94% at typical full load conditions, converting your vehicles alternator power to a more complete charge.

25A solar MPPT

Using sophisticated Maximum Power Point Tracking (MPPT) solar regulator technology, the IDC range of chargers operate as advanced solar controllers, maximising the power generated from the panels to provide a comprehensive and total charge to your auxiliary battery.

Battery Box Features

This particular listing is for a battery box including: 

2 x Marine grade Cigarette type socket – rated to 16 Amps
Includes rubber cap design to protect all sockets.

1 x Engel Type 2 Pin Socket
Includes rubber cap design to protect all sockets

1 x Dual USB adaptor
– rated to 2.5 Amp 5 volt

2 x 50 Amp Anderson connectors
(one fitted to front of box and one on rear)

1 x LCD Digital Volt meter gauge
Allows for accurate voltage reading of your battery (3volt ~ 30 Volts)

1 x Hold down push button switch
– used for Volt gauge

1 x 30 Amp Automatic reset circuit breaker
– Controls all outlet sockets inside the Battery Box

1 x 50 Amp Automatic reset circuit breaker
– Control both 50 Amp Anderson connector on front & rear

– All internal cabling to allow you to simply connect straight to the battery terminals

Internal Dimensions of Battery Box
Length – 330mm
Width – 175mm
Height – 225mm

External Dimensions of Battery Box 
Length – 410mm
Width – 260mm
Height – 312mm
* Dimensions includes all protruding outlet sockets *

MADE IN SOUTH AUSTRALIA BY BLUE APPLE THUMPER

Weight 2 kg
Dimensions 41 × 26 × 31 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.