Sale!

30Amp PWM Solar Charge Controller

$229.00 $189.00

Save: 17.5%

or 4 fortnightly payments of $47.25 with Afterpay More info

SPECIFICATIONS

You make a substantial investment in a solar power setup, so make sure you look after your expensive batteries. With a charge controller, you have total control over battery charging and power usage. The LCD shows the system status and LED’s at a glance showing the batteries charge status.

Specifications:

Model No.  SBC7130

Battery System Voltage  12 Volt

PV Max. Open Circuit Voltage   26 Volt

Continuous load / charge current  30 Amp

Max Charge Current (5mins)  35 Amps

Operation Current (no load & PV)  15mA

Voltage across terminal (PV to battery)  1.2 Volt

Voltage across terminal (battery to load)  0.6 Volt

Electronic Blocking  YES

Battery Reverse Polarity protection  YES

Overcharge & Over-discharge protection:  YES

Battery Status indication  5 State LED Indicators

Charging status indication  3 State LCD Display
 
Recommended wire size  # 10AWG

Weight  0.48kg

Dimensions  150(W) x 85(D) x 45(H) mm

Fuse  40 Amp

Operating ambient temperature  -10 to 50*C

Over temperature protection  YES

Battery Charging float voltage setting  Adjustable from 12.0-15.0V

Battery Charging BULK voltage setting  Adjustable from 12.0-16.0V

DC load control mode (For DC load terminal)  

Low Voltage Disconnect (LVD)  8 – 16 Volts

Low Voltage Reconnect (LVR)  8 – 16 Volts

SKU: REG-30Amp Solar charging Controller Categories: ,
  • User-adjustable charging voltages
  • Suitable for wet or sealed lead-acid, lead calcium, lead antimony, Ni-Cd or Nife batteries
  • Pulse Width Modulation for optimum charging
  • 3-Stage, bulk, absorption, and float charge modes with status on LCD
  • Amp-hour input logging readouts in 3 sets, today and last 2 days
  • 5 state – LED indications of battery levels
  • Electronic overcharge protection and back current blocking to panel
  • Dusk to Dawn automatic on/off with 10 slectable on-off programs
  • Adjustable battery low voltage level disconnect and reconnect for DC output
  • Real time clock
  • System status display – Charge current / battery voltage and capacity
  • Overload and shirt circuit protection
  • Over voltage and reverse polarity protection

Dimension: 150mm W x 85mm D x 45mm H

Weight 1 kg
Dimensions 20 × 10 × 10 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products