Join our mailing list for exclusive deals and events

You can set your main menu in Appearance > Menus

Sale!

PROJECTA IDC25 SOLAR / DC CHARGER

$399.00 $299.00

 Pick up in store

Brochure

Instruction Manual

The Projecta IDC25 is the toughest and most advanced dual battery management system available on the market today.  While everyone else quickly released this new DC-DC technology a few years back,  Projecta were busy in research and development designing the Ultimate DC/Solar Battery Charger.

The IDC25 is simple to operate, designed with a Mode push button for battery selection for Gel, AGM, Wet or Calcium type battery.  The  IDC25 unit is also sealed to IP67 specs, so it can be installed under the bonnet if needed because the unit is dust, splash and shock proof.

The IDC25 can safely operate in extreme conditions up to 80°C, as found in engine bays in hotter climates.

A major feature of the Projecta IDC25 is that it has the latest synchronous switch technology.  The IDC25’s efficiency exceeds 94% at typical full load conditions, converting your vehicle’s 12V DC / 24V DC alternator power to a more complete charge and prolonging the battery life.  This means that the IDC25 will not load your vehicles alternator in order to charge your auxiliary battery at the desired voltage setting which is either  14.1V to 14.7V.

This will not affect the vehicle’s performance ( fual economy and engine performance) from installing the Projecta IDC25.

The IDC25 can be wired to the vehicle ignition, allowing it to operate only when the ignition is turned on.  This ignition connection also enables a “low input operation” mode, for compatibility with modern smart (variable voltage ) alternators.

An additional wire has been fitted to the IDC25 for driving an external L.E.D indicator, in-cabinfor example to remotely display charging and fault status.

CLASS LEADING FEATURES

  • DUAL INPUT OPERATION

Simultanous dual battery charging from both solar and alternator inputs, no manual switching

  • DUST, SPLASH & SHOCK PROOF

Sealed to IP67, IDC25 will resist dust, water and shock damage, making it ideal for under bonnet terperature.

  • 80 DEGREES CELCIUS

IDC25 can safely operate (at a reduced charge rate ) in extreme temperatures up to 80°C, as found in engine bays in hotter climates

  • TEMPERATURE COMPENSATION

IDC25 will continually adjust its charge rate to suit the battery temperature, protecting it from overcharge and overheating

  • PUSH BUTTON CHEMISTRY

Adjust battery chemistry at the touch of a button for optimum charging
IDC25 FOR SAFER CHARGING

  • OVER TEMPERATURE PROTECTION

IDC25 will automatically adjust its output based on the battery temperature, preventing overcharge and overheating in small batteries and hotter climates

  • REVERSE CONNECTION PROTECTION

The charger will detect and indicate a reversed connection on the input and output terminals, preventing damage to the internal circuitry of the unit.

  • OVER AND UNDER VOLTAGE PROTECTION

IDC25 will automatically shut down it it detects an over voltage or under voltage problem, preventing damage to the battery

  • SPARK FREE PROTECTION

IDC25 will not begin charging unless the load is securely connected, preventing output leads from sparking due to accident short circuit

 

 

 

SKU: PROJECTA IDC25 SOLAR / DC CHARGER Categories: , ,

Description

SPECIFICATIONS  
Product details
PART NO. IDC25
SIZE 149 X 122 X 42mm
OPERATING TEMPERATURE -10°C to +80°C
BATTERY CAPACITY 75–300Ah
ALTERNATOR INPUT VOLTAGE 9–32Vdc
SOLAR INPUT 23Vdc, 400W
OUTPUT CURRENT Input 9–11Vdc 20A
Input 11V–32dc 25A
CHARGE CONTROL Gel: 14.1V
AGM: 14.4V
WET: 14.7V
Calcium: 15.4V
SMART ALTERNATOR 12V VEHICLE
Turn On: 12.2–20V
Turn Off: <11.9V
24V VEHICLE
Turn On: ≥24.4–32V
Turn Off: <24V
VSR ALTERNATOR 12V VEHICLE
Turn On: ≥13.4–20V
Turn Off: <12.8V
24V VEHICLE
Turn On: ≥26.8–32V
Turn Off: <25.6V

Additional information

Dimensions 15 × 15 × 10 cm

Reviews

There are no reviews yet!

Be the first to write a review

*

Delivery and Returns Content description.