Sale!

ISUZU Dmax 3 Litre 4JJ1-TC Turbo Diesel or MU-X 3 Litre 4JJ1-TC Turbo Diesel Battery Tray Kit

$1,249.00 $929.00

Save: 25.6%

or 4 fortnightly payments of $232.25 with Afterpay More info

This dual battery tray system is equipped with premium products such as the Projecta IDC25 DC-DC charger for 100% charging from the alternator plus the option for MPPT solar charging. The Projecta IDC25 can be used as either a VSR setup or ignition.
This means that it will automatically start charging at 13.4V when the vehicle is running and then switch off and isolate at 12.8V.  This voltage sensitive charge setup is done when leaving the ignition cable disconnected.
If you have a low voltage alternator which drops below 13.4V when the vehicle is running then it is wise to connect the ignition cable.  This will cause the Projecta IDC25 to stay on when the vehicle is running. The Projecta IDC25 will still switch off when the vehicle is not running.

The battery tray to suit the Isuzu Dmax or MuX is a heavy duty Projecta Battery Tray fully engineered.  This is a DIY fit and comes with instructions.
The Optima D34 battery is a direct fit for the Projecta Battery Tray and is a 55ah.  This battery size can be used to power a 12v Portable Fridge for around 2 days as well as LED camplights.

This Dual Battery Tray kit is equipped with 2 x  50Amp manual circuit breakers for the Projecta IDC25 DC-DC charger for the positive input and output power. Plus 8BnS twin cable for the Projecta IDC25 installation and 6Mtr 6mm twin core cable to the rear control box supplied with a volt display and 2 x Cig sockets to power a 12v fridge or lights.

 

 

HEAVY-DUTY DUAL BATTERY TRAY – SUITS ISUZU
PART NO HDBT400

Suits: Dmax 3 Litre 4JJ1-TC Turbo Diesel,
MU-X 3 Litre 4JJ1-TC Turbo Diesel
Models: Auto/Manual
Years: 2012 onwards
Location: Engine Bay
Max Battery Size (mm): L265 x W174 x H200
Max Battery Weight: 19.6Kg
Suits Battery: N50 (AGM)

OPTIMA D34 Battery

Model: D34

Weight: 19.4kg

C20 Capacity: 55 Ah

Post Type: SAE Post

CCA: 750 Amp

Width: 6.88 in

Length: 10.06 in

Height: 7.88 in

Reserve Capacity @25 Amps: 120 Minutes

Voltage: 12 Volts

Case Material: Polypropylene

Case Color: Light Gray

Cover Color: “OPTIMA” Yellow

Group Size: BCI: 34

Internal Resistance: 0.0028

CA: 870 Amp

 

KEY BENEFITS

  • Deep-cycle and cranking power
  • Up to 3X longer life
  • 15 times more vibration-resistant
  • Virtually spillproof
  • Mountable in virtually any position
  • Maintenance-free
  • Faster recharging
  • Optimal starting power
  • 300+ discharge/recharge cycles

Top of Form

PROJECTA IDC25 CHARGER

 

The Projecta IDC25 is the toughest and most advanced dual battery management system available on the market today.  While everyone else quickly released this new DC-DC technology a few years back,  Projecta were busy in research and development designing the Ultimate DC/Solar Battery Charger.

The IDC25 is simple to operate, designed with a Mode push button for battery selection for Gel, AGM, Wet or Calcium type battery.  The  IDC25 unit is also sealed to IP67 specs, so it can be installed under the bonnet if needed because the unit is dust, splash and shock proof.

The IDC25 can safely operate in extreme conditions up to 80°C, as found in engine bays in hotter climates.

SPECIFICATIONS
Product details
PART NO. IDC25
SIZE 149 X 122 X 42mm
OPERATING TEMPERATURE -10°C to +80°C
BATTERY CAPACITY 75–300Ah
ALTERNATOR INPUT VOLTAGE 9–32Vdc
SOLAR INPUT 23Vdc, 400W
OUTPUT CURRENT Input 9–11Vdc 20A
Input 11V–32dc 25A
CHARGE CONTROL Gel: 14.1V
AGM: 14.4V
WET: 14.7V
Calcium: 15.4V
SMART ALTERNATOR 12V VEHICLE
Turn On: 12.2–20V
Turn Off: <11.9V
24V VEHICLE
Turn On: ≥24.4–32V
Turn Off: <24V
VSR ALTERNATOR 12V VEHICLE
Turn On: ≥13.4–20V
Turn Off: <12.8V
24V VEHICLE
Turn On: ≥26.8–32V
Turn Off: <25.6V

 

 

ACCESSORY CONTROL BOX
VOLT / 2 X CIG

2 X 50AMP MANUAL CIRCUIT BREAKERS

6MTR 6MM TWIN CABLE

8MM TWIN CABLE

YELLOW RING TERMINALS

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.