Custom 100Amp Lithium Slim Battery
Description
100 AH Ultra Slim Lithium Battery suited for most 12v requirements.
Includes: Ultra Slim Powder coated Steel Fabricated Box, Battery Management System (BMS)
5 Year Warranty
This product comes complete in package pre-assembled ready for use.
Installation should be completed by a qualified auto electrician only.
Battery Mount – Ranger (RA) – Behind seat Custom Lithium Battery Mount
Battery Compatibility
This product has been designed to mount the 100Ah Ultra-Slim metal case Lithium battery from Custom Lithium
(Battery not included)
Vehicle Compatibility
Suitable for RA model Rangers from July 2022 onward (Commonly known as “Next-Gen Ranger”).
Not suitable for vehicles that have a behind-seat speaker such as Raptor and most Wildtrak vehicles.
Installation Notes
The vehicle jack will need to be relocated elsewhere in the vehicle.
Installed on the driver-side of the cab back wall.
The back plate includes pre-cut holes for a twin-midi fuse holder, Vistron Smart Shunt and Redarc BCDC battery charger.
No-drill installation, using original thread inserts and holes in the vehicle cab wall. No cutting of metalwork is necessary.
The contoured carpet panel on the back wall must be removed for installation. Once the battery is mounted you may decide to cut the panel and re-fit the remaining parts, but there will be little remaining.
Installation of the battery mounting bracket takes around 30 minutes.
New bolts included.
Redarc BCDCN1225
- Suitable for in-cabin and canopy installations only
- Compact form factor
- Simultaneous DC and solar charging with Green Power Priority
- Maximises the performance and life of your auxiliary battery
- Suits 12V/24V standard and variable voltage/smart alternators
- Suitable for AGM, GEL, standard lead acid, calcium and Lithium (LiFePO4) batteries
- Suitable for use on vehicles with conventional alternator charging systems
REDARC’s BCDC Core 25A DC to DC In-Cabin Battery Charger is the next evolution of the legendary BCDC platform that has been powering off-grid adventures for over 10 years.
The BCDC Core is the perfect DC to DC charging solution for in-cabin, canopy, or battery box setups where dust and weatherproofing isn’t required. Each BCDC Core features REDARC’s tried and tested dual input DC charging tech plus an MPPT solar regulator and Green Power Priority all in the familiar and compact BCDC form factor. These features allow the BCDC Core to efficiently charge from both the alternator and solar simultaneously, ensuring maximum charge capacity no matter the situation.
Looking for a DC-DC Charger for an under bonnet installation? The REDARC BCDC Classic range in 25amp, 40amp and 50amp models could be what you’re looking for.
Max Charge Efficiency
The BCDC Core features a Maximum Power Point Tracking (MPPT) solar regulator and ‘Green Power Priority’. With these features the BCDC Core will charge from both solar and the alternator simultaneously, maximising its charge rate and minimising the load on your alternator, saving fuel.
Compact & Silent
With no loud fans or relays and a small form factor, the BCDC Core can be tucked away, leaving room in the cabin for more important things. Don’t ruin the look of your interior with bulky electronics. Hide it under the rear floor, behind a side panel or under the seats and make your power set up look like it was meant to be there.
Lithium Ready
With chemistry specific charging profiles, including lithium the BCDC Core ensures your batteries are ready for your next adventure. The award-winning technology in the BCDC Core has been independently verified and tested to ensure battery life is maximised, charging your battery to a proven 100%.*
For most applications, the BCDC Core 25A is suitable for battery bank sizes of 60-200AH for AGM and lead acid and up to 100AH for lithium. Check the manufacturer’s data for your battery and ensure that the ‘Continuous Current Rating’ of the charger does not exceed the manufacturer’s recommended maximum charging current. For higher capacity needs of over 200AH, REDARC recommends the BCDC Core 40A.
*Large capacity battery banks may require a few cycles to fully charge.
Backed by the Best
The BCDC Core is designed, tested and manufactured in Australia and is backed by our leading technical support and national REDNetwork certified installer network.
If you’re heading out into the bush and want to get there and back again safely – you can trust REDARC.
Features
- Suitable for in-cabin and canopy installations only
- Compact form factor
- Simultaneous DC and solar charging with Green Power Priority
- Maximises the performance and life of your auxiliary battery
- Suits 12V/24V standard and variable voltage/smart alternators
- Suitable for AGM, GEL, standard lead acid, calcium and Lithium (LiFePO4) batteries
- Suitable for use on vehicles with conventional alternator charging systems
The Smart Battery Shunt
The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.
The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.
The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor.
The SmartShunt is available in 500A. The 1000A and 2000A will follow later this year.
Hardware included in kit
6Mtr 8bns twin cable
6Mtr 6mm twin cable
1 x Single Midi Fuse Holder
1 x Twin Midi Fuse Holder
2 x 40amp Midi Fuse
1 x 50Amp Midi Fuse2600
Cable Lugs included in kit
Reviews
There are no reviews yet.