Custom Lithium 150ah vehicle specific battery.
No Drill solution for your PX or Next Gen Ranger or Raptor with or without premium pack.
This system does not require an additional battery tray as our system is an all in one solution.
Next to the battery terminals we will fit the Victron batter monitor of your choice (BMV712 or Smart Shunt) before you receive your product.
180AMP BMS
Continuous 180AMP
Discharge Overcurrent Protection
M10 Terminals
Redarc BCDCN1225 Core
REDARC’s BCDC Core 25A DC to DC In-Cabin Battery Charger is the next evolution of the legendary BCDC platform that has been powering off-grid adventures for over 10 years.
The BCDC Core is the perfect DC to DC charging solution for in-cabin, canopy, or battery box setups where dust and weatherproofing isn’t required. Each BCDC Core features REDARC’s tried and tested dual input DC charging tech plus an MPPT solar regulator and Green Power Priority all in the familiar and compact BCDC form factor. These features allow the BCDC Core to efficiently charge from both the alternator and solar simultaneously, ensuring maximum charge capacity no matter the situation.
Looking for a DC-DC Charger for an under bonnet installation? The REDARC BCDC Classic range in 25amp, 40amp and 50amp models could be what you’re looking for.
MAX CHARGE EFFICIENCY
The BCDC Core features a Maximum Power Point Tracking (MPPT) solar regulator and ‘Green Power Priority’. With these features the BCDC Core will charge from both solar and the alternator simultaneously, maximising its charge rate and minimising the load on your alternator, saving fuel.
Compact & Silent
With no loud fans or relays and a small form factor, the BCDC Core can be tucked away, leaving room in the cabin for more important things. Don’t ruin the look of your interior with bulky electronics. Hide it under the rear floor, behind a side panel or under the seats and make your power set up look like it was meant to be there.
LITHIUM READY
With chemistry specific charging profiles, including lithium the BCDC Core ensures your batteries are ready for your next adventure. The award-winning technology in the BCDC Core has been independently verified and tested to ensure battery life is maximised, charging your battery to a proven 100%.*
For most applications, the BCDC Core 25A is suitable for battery bank sizes of 60-200AH for AGM and lead acid and up to 100AH for lithium. Check the manufacturer’s data for your battery and ensure that the ‘Continuous Current Rating’ of the charger does not exceed the manufacturer’s recommended maximum charging current. For higher capacity needs of over 200AH, REDARC recommends the BCDC Core 40A.
*Large capacity battery banks may require a few cycles to fully charge.
BACKED BY THE BEST
The BCDC Core is designed, tested and manufactured in Australia and is backed by our leading technical support and national REDNetwork certified installer network.
If you’re heading out into the bush and want to get there and back again safely – you can trust REDARC.
FEATURES
- Suitable for in-cabin and canopy installations only
- Compact form factor
- Simultaneous DC and solar charging with Green Power Priority
- Maximises the performance and life of your auxiliary battery
- Suits 12V/24V standard and variable voltage/smart alternators
- Suitable for AGM, GEL, standard lead acid, calcium and Lithium (LiFePO4) batteries
- Suitable for use on vehicles with conventional alternator charging systems
Ausmotion Behind Seat Bracket – RA Ranger
The perfect companion product for our Ranger (RA) behind seat battery mounts, this bracket allows installation of a DCDC battery charger on the back wall of the cab, keeping the length of cable between the charger and battery to a minimum.
As seen here, the charger sits neatly above the Ford audio amplifier (where fitted). The carpet panel doesn’t have to be cut to fit the bracket and charger, but many installer prefer to do so, allowing them to clearly see the LED indicators on Redarc chargers.
In vehicles with the premium audio system the carpet panel includes a cutout for the amplifier which can be easily extended upward as seen below. In vehicles without the premium audio system, the charger is installed in the same position and the carpet can be trimmed as desired.
Victron Energy Smart Shunt
The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.
The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.
The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor.
THUMPER
Control Box VOLT 12V / 24V Front mount – Cigarette + Dual USB + 50 Amp Anderson
All control boxes are internally soldered and wired with 4mm and 6mm automotive twin sheathed oxygen free cable. These quality control boxes will truly last the test of time and will not tarnish (go green) after many years of use in harsh environments. The use of oxygen free cable means that voltage drop will be greatly reduced when using these control boxes.
Specifications per outlet box:Â
– 1 x Marine Grade Stainless steel cigarette outlet socket – rated to 16 Amps
– 1 x Dual USB outlet socket – rated min. 2.4Amp 5 Volts
– 1 x Genuine 50Amp Anderson connector (not fused within box)
– 1 x In built 15 Amp circuit breaker – wired to protect the twin outlets
– 1 x LCD Digital Volt meter (Multi – Voltage 12 Volt & 24 Volt) – This voltage meter is more accurate than previous models for LITHIUM batteries as well as standard lead acid
– 1 x HOLD down push button for LCD display (Turns Volt meter ON / OFF)
– 1 x approx. 250mm length 6mm Twin core cable with yellow crimp joiners
Dimensions:
Length – 54 mm
Depth –  35 mm
Height – 160 mm
** All measurements include sockets
2 Year Warranty
HARDWARE
1 x Midi Inline Fuse Holder
1 x Twin Midi Fuse Holder
2 x 40Amp Midi Fuse
1 x 50Amp Midi Fuse
6Mtr 8mm Twin Cable
6Mtr 6mm Twin Cable
Ring Terminals to suite
Reviews
There are no reviews yet.