Custom Lithium 200Amp 380Amp BMS
|Dimensions||620 × 65 × 380 mm|
200AH Ultra Slim Lithium Battery suited for most 12v requirements.
Includes: Powdercoated Steel, Battery Management System (BMS), 5 Year Warranty
Redarc Core BCDCN1240
- Suitable for in-cabin and canopy installations only
- Compact form factor
- Simultaneous DC and solar charging with Green Power Priority
- Maximises the performance and life of your auxiliary battery
- Suits 12V/24V standard and variable voltage/smart alternators
- Suitable for AGM, GEL, standard lead acid, calcium and Lithium (LiFePO4) batteries
- Suitable for use on vehicles with conventional alternator charging systems
|Input Charge||Simultaneous vehicle and solar|
|Installation Type||In-cabin only|
|Input (Operating) Voltage||9 – 32VDC|
|Output System Voltage||12VDC|
|Maximum Charging Voltage||15.3V|
|Output Current Rating (Cont.)||40A|
|Input Fuse Rating||60A|
|Output Fuse Rating||60A|
|Standby Current Draw||<8mA|
Battery Mount – Ranger – Custom Lithium Ultra-Slim 200Ah
Made to order Battery mount to suit Custom Lithium 200Ah ultra-slim battery.
Locally designed and manufactured in Australia.
This product has been designed specifically to mount the following battery only.
This mount designed for direct mounting of the Custom Lithium battery.
Jack and tools must be relocated – See below for alternative jack and tool mounting location.
Original jack mounting bracket (welded into the car by Ford) must remain in place as the lower part of this product is bolted to it.
Suitable for PXI, PXII, PXIII and Ranger Raptor vehicles.
Also fits 2nd generation Mazda BT50.
BT50, PXI Ranger and PXII Ranger require no modification to the vehicle to install this product.
Installation on PX3 and Raptor models will require a small section of the carpet on the rear cab wall to be cut out using a sharp knife. This can be done easily in the car. Vehicles with remote controlled roller shutter or keyless entry may require the Antenna module found behind the carpet to be unclipped from the back wall of the cab and re-positioned lower down on the wall with double-sided tape.
No-drill installation, using original Ford thread inserts in the back wall. No cutting of metal is required.
Battery Charger Mounting
Our under-seat battery charger bracket is the perfect companion for the behind seat battery mount and is available as an optional extra. Please add in bracket section.
Jack and Tool Relocation
The AusMotion jack and tool mount is the perfect solution, allowing them to be securely mounted in the tub and is available as an optional extra. Please add in brackets section.
Victron Energy Smart Shunt 500Amp
The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
Alternatively, the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.
The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.
The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor.
The SmartShunt is available in 500A. The 1000A and 2000A will follow later this year.
Components included in package –
1 x Midi Inline Fuse Holder
1 x Midi Dual Holder
2 x 60Amp Midi Fuse
1 x 50Amp Midi Fuse
6Mtr 6 bns twin cable
6Mtr 6mm twin cable