Suitable for Toyota Hilux 2015+ (Gen8 AN120, AN130)
Installed on the driver-side of the cab back wall.
The back plate includes pre-cut holes for two twin-midi fuse holders or two single-midi fuse holders (fuse holders not included).
No-drill installation, using original thread inserts and holes in the vehicle cab wall. No cutting of metalwork is necessary.
One hole in the cab wall cross-member needs to be tapped to convert it from a 5mm hole to an M6 bolt hole – M6 tap included.
The contoured carpet panel on the back wall must be removed for installation. Once the battery is mounted you may decide to cut the panel and re-fit the remaining parts, but there will be little remaining on the driver side.
Installation of the battery mounting bracket takes around 30 minutes.
New bolts included.
This product includes a universal battery charger bracket to fit to the left-hand end of the back plate as shown above. This plate includes pre-cut holes for Redarc BCDC chargers and Intervolt DCDC PRo chargers