Join our mailing list for exclusive deals and events
• 145W Monocrystalline Solar Panel
• 1 x 12V 30Amp Charge Controller
• 3 x Female MC4 Connector
• 3 x Male MC4 Connector
• 1 x MC4 Y Connector Lead – 2 socket to 1 plug
• 1 x MC4 Y Connector Lead – 2 Plug to 1 Socket
145 Watt Monocrystalline Solar Panel
These quality Powertech monocrystalline solar panels offer you the same robust construction and performance as the leading brand names, whilst also offering a nice cost saving. Despite being manufactured in China, they are definitely suitable for harsh Australian conditions.
Our Powertech solar panels are among the best to come out of Asia, and we are not alone in our beliefs! Our supplier has been producing solar panels for the large European market for several years, including manufacturing the panels for a 100kW solar plant in Greece & a 300kW solar plant in Spain.
When we visited their factory we were amazed at the high level of quality control. Each individual cell is tested and measured before assembling, and then each and every panel is tested and measured to IEC standards before shipping them out. Unlike most of the Asian solar panel suppliers, our factory actually performs the silicon doping process in-house, which provides further quality control over the end product as they are in control of the whole process from start to finish.
Each panel is also uniquely identified with a barcode serial number for traceability and warranty purposes, and the test results for each panel are logged with that serial number – so you can rest assured our factory means to ensure they supply a quality product and will stand by their claims of performance with our 25 year limited warranty.
25 year limited warranty
All Powertech monocrystalline solar panels are covered by a 25 year limited warranty. This warranty covers the panels for defects in construction and manufacturing for a period of 24 months, and warrants that the electrical output will remain above 80% of its original rated output for a period of 25 years.
With the increase in silicon solar cell efficiency, we are now able to offer this 145W rated solar panel with the same physical dimensions as a typical 120W solar panel (such as our superseded ZM-9098). Excellent for caravan, marine or other applications where available surface area is limited.
• Max. power: 145W
• Rated voltage: 12V
• Voltage at max. power: 18V
• Current at max. power: 8.06A
• Open circuit voltage: 22.8V
• Short circuit current: 8.96A
• Dimensions: 1250(H) x 808(W) x 35(D)mm
• Weight: 12kg
30Amp PWM Solar Charge Controller
You make a substantial investment in a solar power setup, so make sure you look after your expensive batteries. With this unit, you have total control over battery charging and power usage. The LCD shows the system status and 3 LEDs at a glance show battery charge status, load status and solar panel connection. Microprocessor is programmed with 3-stage charging algorithms and pulse width modulation duty cycles of 0 – 100% to provide optimum charge conditions and battery life. 12V/30A and 24V/20A models available.
MP-3722 12V 30A Solar Charge Controller
• Display of system status:
• Charge current
• Load current
• Battery voltage
• Battery capacity
• Bulk, absorption & float charge status
• LED indication of battery levels
• Overload and short circuit protection
• Over voltage and reverse polarity protection
• Rated charge/load current: 30A
• System voltage: 12V
• Dimensions: 150(L) x 85(W) x 50(H)mm
MC4 Female and Male Plugs
IP67 rated for maximum environmental protection, these photovoltaic (PV) system connectors are ideally suited to harsh installations such as solar panel arrays and other permanent outdoor applications. When matched with our solar power cables WH-3120 and WH-3122, you can leave your cabling out in the open with the knowledge that you will never have a bad connection or an oxidised power cable. Both panel mounting and in-line connectors are available to suit a wide range of system applications:
• Rated voltage: 1000VDC
• Rated current: 30A at 70°C, 25A at 85°C
• Contact resistance: <5 milliohms
• Temperature range: -40 – 90°C
• TUV certification: 2 PfG 1161/01.06
MC4 Y Lead Connector
Used for connecting the output of two solar panels in parallel or connecting multiple panels in an array. Waterproof and UV resistant. Generally used on the negative pole of the panel.
• Pin dimension 4mm
• Tin plated copper contacts
• Contact resistance <5m ohm
• IP67 rated
• -40°C to +90°C
• Housing material PPO
• TUV certified