"Purchases under $100 will incur a $12 shipping fee - Thank You"

Victron Energy MPPT 100/20 with Seraphim High Voltage Solar Panel Solar System

$619.80 $549.00

Save: 11.4%

or 4 fortnightly payments of $137.25 with Afterpay More info

This solar system will have you camping outback with self-sufficient power from this high voltage 330 watt Monocrystalline solar panels pumping out a maximum of 22 amps through the Victron Energy MPPT solar controller.  The 330 watt  Monocrystalline solar panels are designed to perform in all round conditions from sunny days to overcast weather.  By using a Victron Energy MPPT solar controller you can harness maximum output.

By including a Victron Energy MPPT solar charge controller the power output of the solar panels is increased by 20-30% output for maximum efficiency.  Whether you currently have AGM batteries or plan on up-grading to a Lithium battery system the Victron Energy MPPT Smart solar controller is compatible for any battery type.

The Victron Energy MPPT Smart solar charge controller has Bluetooth monitoring from a phone or Ipad and Tablet.  This will display the solar voltage and watts plus battery voltage and amps input charge to the battery. Plus you have the ability to look back at the history performance of the solar system to check on how much wattage the solar panels are producing.


Seraphim’s Blade™ Series solar module boasts two identical parts, which are composed of cells that are half the size of ordinary solar cells. By cutting cells into halves, these smaller currents will help reduce “Cell To Module” loss, which means higher output. In the meantime, the overall space between cells are doubled, and more light will be transferred into power through multiple reflections. Compared to mainstream standard modules, the Blade™ series module has lower current and series resistance which helps minimize mismatch loss, internal power loss, and shadow effect, etc. Once one cell has EL defect or appearance defect, such as black edge or V sharp. After cutting, one intact half can be reused

  • Less Mismatch loss – Instead of 6 internal strings of cells, the Blade series module has 2 x 6 shorter ones. This design effectively deals with the mismatch happened between cells caused by shadow, out of sync performance degradation, ect.
  • Less Internal Power Loss – The ribbon length of half-cell is shorter than normal cell. Calculated by Joule’s law and Ohm’ law, the power loss reduction is nearly 6%
  • Higher Yield Due to Better Shading Response – Blade™ comprises two separated and identical solar cell arrays, which means the ordinary strings of cells are cut into halves, and these shorter strings compose arrays which has separated current paths. When a module is shaded, only one side shaded array’s current will be impacted, while the other array will still be functionally producing power. Under this circumstance, when a module is shaded, the affected working areas of Blade™ will be 50% less
Weight (kg)
Length (mm)
Height (mm)
Width (mm)
Length Packaging (mm)
Height Packaging (mm)
Width Packaging (mm)

Victron Energy MPPT 100/20 Solar Charge Controller

Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
For a wired data connection to a Color Control GX, other GX products, PC or other devices
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve
energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect
the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay).
Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life.
The load output is short circuit proof.
Battery Life: intelligent battery management
When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the
battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation
(no regular full recharge) will destroy a lead-acid battery within weeks or months.
The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load
disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly
the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is
achieved about once every week.
Programmable battery charge algorithm
See the software section on our website for details
Day/night timing and light dimming option
See the software section on our website for details
Internal temperature sensor
Compensates absorption and float charge voltage for temperature.
Optional external battery voltage and temperature sensing via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to
one or more SmartSolar Charge Controllers.
Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts.
Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.
This system all so includes
10Mtr 8mm twin cable
MC4 Socket and Plug
Inline Midi Fuse Holder with 30Amp Fuse


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.